Magic Chef MCSDRY1S Owner's Manual download pdf (Page 7)

WALL-MOUNTING INSTRUCTIONS

Tools and Parts Required for Plaster

and/or Wood Installation (Not Included)

Drill & Drill Bit 1

Phillips Head Screwdriver 1

Expanding Wall Anchor 8

Wooden Slats 2

Wall-Mounting Kit Includes

Wall-Mounting Hooks 2

1” Phillips Head Screws 4

Plastic Spacers 2

½” Phillips Flat Head Screws 2

Exhaust Pipe 1

½” Phillips Round Head Screws 3

ADJUSTING THE LEVELING LEGS

The dryer is shipped with a bag containing the user guide and

four (4) leveling legs. See the illustration to the right to install

and adjust the leveling legs.

If the dryer is placed on an uneven or weak surface, noise or

vibrations will occur from the appliance. If the floor is uneven,

adjust the height level of the leveling legs accordingly. DO NOT

insert pieces of wood or any other objects under the legs.

Leveling Leg

Wall-Mounting Instructions

* NOTE: It is recommended to complete the following procedure with at least 2 people.

NOTE: As wall materials vary, the supplied hardware for fixing to the wall may be inappropriate for your wall

type. Consult your local hardware / home improvement center for suggestions on the necessary hardware for

your particular wall type.

1 Determine the position where you will be installing the mounting hooks.

• This dryer is not designed to sit on top of your washing machine.

• A minimum of 2 inches is required between the top of the dryer and the ceiling above to allow easy

installation and adequate spacing for exhaust.

If mounting above a top load washing machine, allow sufficient spacing to open the lid of the washer. In the

case of a front loading washer, allow sufficient breathing space.

2 Although the supplied mounting hooks can be installed directly to the wall using the existing wooden studs, the

preferred method of installation is using wooden slats that provide a flat, level installation surface and added

stability to the whole wall installation.

3 Use two wooden slats (not included)

between the studs to mount the hooks.

Recommended wooden slat size is 23” (L)

x 3½” (H) x 1” (D).

When using the wooden slats to install

on drywall material, you must use

expansion wall anchor bolts to safely

secure the slats to the drywall.

Wall

24”

23”

Wooden Slats 23” (L) x 3 ½” (H) x 1” (D)

Expanding Wall Anchor 8 x 2”

EN-7

1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

Comments to this Manuals

No comments

Magic Chef MCSDRY1S Owner's Manual Page 7

Comments to this Manuals