Magic Chef MCBR1010W User Manual download pdf (Page 7)

OPERATING YOUR REFRIGERATOR

Temperature Control

• Your refrigerator has one control for regulating the

temperature. The temperature control is located on the

top left hand corner of the refrigerator compartment.

• The first time you turn the unit on, adjust the temperature

control knob to “MAX” and run for at least 2 hours before

putting foods inside. This will ensure the cabinet is

thoroughly chilled before food is put in.

• The range of the REFRIGERATOR temperature control is

from position "MIN" the warmest to "MAX" the coldest.

Adjust the temperature control to the setting that best

suits your needs. The setting of “MED” should be

appropriate for home or office refrigerator use.

• NOTE;

• If the unit is unplugged, loses power; you must wait 3 to 5 minutes before restarting the

unit. If you attempt to restart before this time delay, the refrigerator will not start.

• Large amounts of food will lower the cooling efficiency of the appliance.

• Do not place the foods on the air outlet, and leave spaces for airflow.

• If you choose to change the thermostat setting, adjust thermostat control by one

increment at a time. Allow several hours for temperature to stabilize between

adjustments.

• Adjusting the temperature control in the refrigerator compartment will affect the

temperature in both the refrigerator and the freezer compartment.

Changing The Light Bulb

Before removing the light bulb, turn off the refrigerator first

and then unplug the unit from the wall outlet. Failure to do so

could result in electrical shock or personal injury.

• Use Phillips screwdriver to take out screw.

• Remove the light cover by pulling downwards gently

• Unscrew the bulb

• Replace with a 15 watt-refrigerator bulb that is the same

shape and size.

• Replace the light bulb cover and tighten screw.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Magic Chef MCBR1010W User Manual Page 7